Repositorio

MMX

Una ruta completa desde cero hasta una configuración Klipper multicolor funcional: archivos, lista de materiales, ensamblaje de hardware, cableado, configuración Happy Hare, calibración, primera impresión y soporte.

v1.0ActivoPaquete final de releaseKlipper

Empezar build Release de Printables Construcciones comunitarias Discord

4 gatesConfiguraci?n de gates documentada

Type-AArquitectura de selector por servo

EBB42Placa de cableado de referencia

Happy HareSoftware Klipper MMU

Print settings

MMX is designed with tight functional tolerances. Before printing the parts, check Flow, Pressure Advance and Shrinkage / dimensional accuracy. Ideally, complete the full CN3D calibration overview first.

Open Calibration Overview Open latest Printables release

Use the current release notes first

The Printables release page is the latest source for the downloadable files and per-part print notes. The values below are only the documented baseline from the MMX build guide and should not override newer release notes.

Setting	Documented baseline	Note
Layer height	0.20 mm	Use for the standard build unless the release files say otherwise.
Wall count	4 walls	Important around shafts, bearing seats and gates.
Top / bottom	5 solid layers	Documented in the MMX build guide.
Extrusion width	Forced 0.40 mm	Keeps functional features predictable.
Infill type	Gyroid	Documented in the MMX build guide.
Material	Follow the current Printables recommendation	Do not guess; use the release notes for the exact part package you download.
LED diffusers	Semi-transparent material	Needed for visible gate status LEDs.

Before sending the print

Download the newest STL / 3MF / CAD package from the official Printables page.
Use the supplied 3MF where provided, especially for gates, because it can include support blockers for filament paths.
Print for clean holes, clean bearing seats and smooth filament paths — not for maximum speed.
After printing, test shaft holes, bearing seats, ECAS paths, idler movement and PTFE tunnels before final assembly.

Print orientation and support examples

Gate part CAD view with the support-blocker region highlighted in red on a dark background — The supplied 3MF for the Gate part includes a support blocker through the filament path, so you don't need to remove supports from inside the channel.

Slicer preview of the Gate part showing orange model and green support material produced by the blocker — Slicer preview of the same support blocker: orange is the model, green is the small amount of support material generated.

Gate printed on its side — first orientation view — Gates can also be printed on their side for a smoother surface between gates, and about 5 minutes faster.